Hearing aid whistling, also known as feedback, occurs when sound that is picked up by the microphone in the hearing aid is amplified and then leaks back into the microphone, creating a feedback loop. Here are some tips to help avoid hearing aid whistling:
- Check the fit of your hearing aids: A good fit can help prevent sound from leaking out of your ears and into the microphone, which can cause feedback.
- Use wax guards or filters: Wax guards or filters can help prevent earwax and other debris from clogging the hearing aid and causing feedback.
- Change the direction of the hearing aid microphone: If the microphone is facing directly towards a source of sound, it can amplify the sound and cause feedback. Try repositioning the hearing aid so that the microphone points towards your cheek instead.
- Avoid covering the hearing aid microphone: Covering the hearing aid microphone, such as with a hat or hair, can trap sound inside the hearing aid and cause feedback.
- Avoid using hearing aids in noisy environments: If you're in a noisy environment, try to reduce the volume of your hearing aids to minimize the risk of feedback.
By following these tips, you can help avoid hearing aid whistling and ensure that you can enjoy clear sound from your hearing aids.
Hearing aids won't charge
Before proceeding, kindly ensure that the blue sticker located at the bottom of the hearing aid has been removed. To begin charging, insert the hearing aid into the charging case and connect the case to a power source. The indicator light corresponding to the charging box will illuminate in orange to indicate that the hearing aid at that particular position is being charged. For optimal charging results, it is recommended to close the cover to secure the hearing aid in the proper charging position.
If you experience itching while wearing a hearing aid, there are several steps you can take to relieve the discomfort:
- Gradually increase wearing time: Start by wearing the hearing aid for short periods and gradually increase the time you wear it.
- Clean the hearing aid and ear canal: Regular cleaning of the hearing aid and the ear canal can prevent itching caused by the buildup of wax or debris.
- Use a skin protectant: You can apply a skin protectant, such as petroleum jelly, to the skin surrounding the ear canal to reduce itching.
- Take a break from wearing the hearing aid: If itching persists, take a break from wearing the hearing aid and allow your skin to rest. If the itching continues after taking a break, consult your hearing health professional for further evaluation and treatment.
By following these steps, you can relieve itching and enjoy a comfortable wearing experience with your hearing aid.
Not sure what to do with the "excess" long wires on the sound tube
The end of the tube features a long wire which serves as a "stabilizer". This helps to enhance the stability of the sound tube and ear dome, allowing for easier placement in the ear by gently curving the wire. Additionally, the wire reduces the likelihood of dropping and losing the hearing aid. If the presence of the wire is not desired, it can be trimmed without impacting the function of the hearing aid.
Shorter battery life
Shorter battery life is a normal phenomenon, which can be affected by usage and environmental conditions. For instance, low temperatures can lead to a decrease in battery life, while higher temperatures can increase it. To maximize battery life, it is advisable to fully charge the hearing aid every time it is charged, until the indicator light corresponding to the charging position turns green or goes off. If the battery life of the LUNA falls below 8 hours, the customer may be eligible for a replacement by covering the applicable deductible.
Sound tube too short/too long
Please contact us for a free replacement.
Click here to download the LUNA User Manual.
Activate the charging function
To activate the charging function of the hearing aid, remove the blue sticker located at the bottom of the device. The charging case features three charging indicators. The lights on either side indicate the charging status of the hearing aids, while the middle light indicates the charging status of the battery in the charging case. The orange light signifies that charging is in progress, and the green light indicates that charging is complete. The charging case is equipped with a charging protection system, which allows the hearing aids to remain in the charging case for an extended period without any damage. When the protection system is automatically triggered, both side lights will turn off.
To adjust the volume of your hearing aid, use the button. A short press on the top button will increase the volume level, while a short press on the bottom button will decrease it.
Switch hearing programs
To switch programs, please hold the button down for two seconds. Upon hearing one beep, you have switched to Program 1 (P1). Upon hearing two beeps, you have switched to Program 2 (P2). P1 is best suited for use in quiet environments, while P2 is optimized for use in noisy environments.
Long press the button for 5 seconds to manually turn the hearing aid on or off. Typically, manual activation is not necessary as the hearing aid automatically turns on when removed from the charging case and turns off when placed back in the case.
Still have questions? Don't worry!
For fastest service, fill out the form below to tell us about the problem you still have.
*Please make sure your email address is correct. If you do not hear back within 24 hours, please check your spam folder.