Hearing aid whistling, also known as feedback, occurs when sound that is picked up by the microphone in the hearing aid is amplified and then leaks back into the microphone, creating a feedback loop. Here are some tips to help avoid hearing aid whistling:
- Check the fit of your hearing aids: A good fit can help prevent sound from leaking out of your ears and into the microphone, which can cause feedback.
- Use wax guards or filters: Wax guards or filters can help prevent earwax and other debris from clogging the hearing aid and causing feedback.
- Change the direction of the hearing aid microphone: If the microphone is facing directly towards a source of sound, it can amplify the sound and cause feedback. Try repositioning the hearing aid so that the microphone points towards your cheek instead.
- Avoid covering the hearing aid microphone: Covering the hearing aid microphone, such as with a hat or hair, can trap sound inside the hearing aid and cause feedback.
- Avoid using hearing aids in noisy environments: If you're in a noisy environment, try to reduce the volume of your hearing aids to minimize the risk of feedback.
By following these tips, you can help avoid hearing aid whistling and ensure that you can enjoy clear sound from your hearing aids.
If you experience itching while wearing a hearing aid, there are several steps you can take to relieve the discomfort:
- Gradually increase wearing time: Start by wearing the hearing aid for short periods and gradually increase the time you wear it.
- Clean the hearing aid and ear canal: Regular cleaning of the hearing aid and the ear canal can prevent itching caused by the buildup of wax or debris.
- Use a skin protectant: You can apply a skin protectant, such as petroleum jelly, to the skin surrounding the ear canal to reduce itching.
- Take a break from wearing the hearing aid: If itching persists, take a break from wearing the hearing aid and allow your skin to rest. If the itching continues after taking a break, consult your hearing health professional for further evaluation and treatment.
By following these steps, you can relieve itching and enjoy a comfortable wearing experience with your hearing aid.
Sound tube too short/too long
Please contact us for a free replacement.
Click here to download the LUNA Pro user manual.
Activate the charging function
To activate your hearing aids for the first time, kindly connect the charging case to a power source, which will prompt the device to transition from its dormant state.
A short press on the button will initiate volume adjustment. The top button will increase the volume, while the bottom button will decrease it.
Switch hearing programs
To change the program, press and hold the button for 2 seconds. Upon releasing the button, you will hear one, two, or three beeps to indicate that you have switched to Program 1 (P1), Program 2 (P2), or Program 3 (P3) respectively. Program 1 (P1) is optimized for quiet environments, such as at home or in an office setting. Program 2 (P2) is designed for use in moderate noise environments, such as outdoors or in a busy supermarket or restaurant. Program 3 (P3) is optimized for use in noisy environments with close conversations, such as in a crowded restaurant.
Long press the button for five seconds to manually toggle the on/off function of the hearing aid. As a general rule, manual activation is not required as the device is designed to automatically turn on when removed from the charging case and turn off upon placement back into the charging case.
Still have questions? Don't worry!
For fastest service, fill out the form below to tell us about the problem you still have.
*Please make sure your email address is correct. If you do not hear back within 24 hours, please check your spam folder.